جديدة آلة منصة نقالة ISG Pack Robo Wrap 600B

Pallet wrapping robot for wrapping palletised loads equipped with motorised pre-stretching at fixed ratios.

The pallet wrapping robot model Robo Wrap 600 B is a battery-powered machine designed for wrapping pallets of any shape, weight and size using stretch film. The machine is equipped with a motorised pre-stretch with fixed ratios with a rotation speed of 35/90 m/min and a carriage up and down speed that can be adjusted (along with other parameters) via a simple and intuitive colour touch screen control panel.

MANOEUVRABILITY AND SAFETY

To facilitate the movement of the pallet wrapping robot by the operator, two controls have been installed on the drawbar that allow the machine to be moved electrically. The front of the pallet wrapping robot is also fitted with a safety bumper that allows the machine to stop immediately should it collide with an operator or obstacle.

GENERAL CHARACTERISTICS OF THE ROBOT

The pallet wrapping robot can process products with minimum dimensions of L 600 x W 600 x H 1000 mm. The machine is equipped with a Siemens PLC and a 7.2 colour touch screen display that allows the adjustment of different parameters such as carriage up and down speed, photocell reading delay, cycle counter, automatic film cutting, reinforcement cycle at preset height, etc.

GENERAL FEATURES

- Film carriage by transmission chain
- 2 AGV battery 12 volt - 120 Ah serial connected
- High frequency battery charger integrated
- Film tensioning by mechanical brake
- Powered pre-stretch 2 positions 230 - 300% (Robo Wrap 600 B) + Emegency stop in compliance with CE regulations
- Safety bumper
- Start cycle with remote control
- Automatic film cutting at the end of the cycle (only mod. Robo Wrap 600 B)
- Full charge cycle time of 8 hours
- Lateral contact wheel with adjustable height
- Control panel with color 7,2” touch screen
- Machine controlled by PLC SIEMENS S7/200
- Acoustic wearning and lamp at the cycle start
- Up to 150 pallets (W 800 x L1200 x 1500 mm )
- Emergency wheel in case of low battery
- Handle release system for moving the robot
- Cycle counter
- Manual working mode

PARAMETERS ADJUSTABLE BY CONTROL PANEL

- Number of rounds at the bottom of the pallet
- Number of rounds at the top of the pallet
- Adjustable rotating speed from 35 - 90 mt/min
- Adjustable ascending carriage speed
- Adjustable descending carriage speed
- Adjustable number of ascending and descending cycles
- Adjustable photocell delay
- Adjustable film cut parameters
- On/off automatic cutting film

CYCLES ACTIVATED BY CONTROL PANEL

- Ascending and descending cycle
- Only ascending cycle
- Reinforce cycle at a programmed height (ascending cycle, ascending/descending cycle)
- Altimeter cycle (pallet height setting) to detect the pallet excluding the photocell
- Top sheet cycle (ascending/descending)
- N° 10 programmable cycles by touch screen according to the product/pallet to wrap