مخرطة المعادن Emco E45

This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine.
Location: AT
Spindle Power: 13 kW
Connection: KK5 (DIN 55026)
Bar capacity: 45 mm
Drive power: 13 kW
Speed range: 0–6300 rpm
Driven tools: max. 4 kW / max. 16 Nm
Driven tools speed: 0–5000 rpm
Max. clamping force: 6000 N
Morse taper: MK4
Max. speed: 6300 rpm
Machine packaging: pallet + roll-up cover
Bar length: 850–1200 mm
Bar diameter: Ø 8–95 mm
Max. feed rate: 60 m/min
Bar change: approx. 3 s
Magazine change: approx. 15 s
Material support area: 550 × 1210 mm
Material capacity: 10 × Ø 55 mm
Operating side: right
Power supply: 240 V DC/DC
Air supply: 6 bar
Dimensions: 1700 × 1250 × 1090–1380 mm
Safety device: CE
Discharge height: 1200 mm
Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)
Max. part length: 120 mm
Max. diameter: 45 mm (51 mm)
Max. weight: 2 kg
net weight: approx. 500 kg
C-axis on main spindle
Tool turret
12-position VDI30 axial
Directional logic for up to 6 driven tools
Tailstock
Programmable
hydraulically actuated
Hollow clamping cylinder incl. draw tube
Control & software
SINUMERIK 828D OPERATE
SHOPTURN dialog programming
USB interface
Network / Ethernet
10.4" TFT color monitor
3D simulation
Media & machine features
Machine light
Coolant system incl. pump (3.5 bar)
Hydraulic unit
Chip conveyor interface
CE certificate
Documentation
Tool measurement (E45)
Measuring arm fixed in the work area
Tool measurement on the turret
Short setup times / precise measurement / cost-efficient
Workpiece clamping
3-jaw chuck KK5
Soft + hard jaws
Other (machine-related)
Water gun
Air to spindle
Oil/coolant separator
Automatic coolant monitoring
Electronic handwheel
Tool change guard
Hydraulic connections
Pneumatic connections
Additional equipment
Bar feeder / magazine (SL1200 – as referenced)
High-speed function
Documentation
Spindle extension (for bar feeder use)
E45 / MT45 / HT45 → DM45
For 45 mm spindle
Short bars up to 1100 mm
With reducing sleeves (3 pieces)
Required for use with SL1200
Chip conveyor
Hinged belt conveyor
High-pressure coolant unit
14 bar / 50 Hz
Additional high-pressure pump
For tools with internal coolant
Interface & software
Robot interface
PROFI-NET interface
24 V signals
Safety release
Automatic/manual operation switching
Additional components
PC keyboard USB (QWERTY)
Installation & mounting hardware
4× vibration absorbers
4× mounting brackets
4× heavy-duty anchors
Parts collection device
Pneumatically operated
Collection box / conveyor belt